Reasons Why Your Sliding Door Is Stopping

When a sliding door is installed, a doorstop is placed on the track. This means that when your sliding door stops, then it should have hit a doorstop. In some instances also, a doorstop is attached to the floor. Whichever of the two can be used. There are instances in which both methods are used on one door. It is imperative that you understand how the stopping system works.

Reasons Why Your Sliding Door Is Stopping

Door Stops

Sliding door stops are usually integrated into the mounting points. This gives you an opportunity to mount the door stop at any point on the track. If you have some problems with your glass door, wheels or bolts don't estimate to call or email (877) 299-9179 24/7.

Bottom stops, on the other hand, are also used as an alternative to door stops. In other instances, they can be used together with the door stops. When they are on their own, bottom stops are a good solution for post-install door travel issues. These bottom stops are in two types. There are the standard bottom ones and the axel bottom stops.

There are instances in which you can use both the door stops and the bottom stops. If you are foreseeing an instance in which your door will be a heavy panel or be put to heavy use, then it is a good idea that you use both stops.

However, there are those other instances in which a sliding door can stick. This is usually a result of inconvenience. If this is left unattended, it can contribute to more complex issues. This can result in a very expensive replacement expenditure on your side.

The first step in this is to first find out what could have caused the problem. In most instances, what is causing your sliding door to stick rather than stop is a small matter that you can resolve all by yourself. There are a number of things that you will have to check out to be able to resolve such an issue.

First, you should have a look at the alignment. Your door moves on a track. In the event that it is not moving effectively, then there could be an issue with the track. If the door is leaning on one side when you push it, check whether it is sticking at the same time. If so, then it is an alignment issue. Get a helping hand to lift the door back on track and the issue will have been solved. Just push the door back and forth to make sure that it is back to track.

The second most likely issue is that the track is dirty and blocked. This prevents the sliding door from free movement. Get a small brush and scrub the tracks to get off the dust and debris. Your door will restore its freeroll again. Prevent reoccurrence of this by consistently cleaning then track. You should also lubricate the track using a non-wax lubricant.

You should also inspect the rollers. There are a number of issues that might have arisen. The rollers could just be dirty as a result of clogging and dust. They could also be broken from a year of use. In the first instance, just get a stiff wire brush and clean the rollers by taking out the debris and the dust. This can be achieved by getting the door off the track first to reach the location of the rollers. Spay the rollers with a lubricant after you have cleaned it. If this strategy fails to work out, then there is a possibility that the rollers are worn out and due for replacement. Unscrew and remove the old rollers and replace them with new ones.