When your sliding patio door is not level, it becomes a disappointment to you when dealing with it. It is further shameful when you have company as it might lead to an annoying squeak when opening or closing it. This automatically calls for the leveling of the glass sliding door. This is just another issue that you can expect in sliding door repair. There are two main ways of ensuring that this is achieved. You have the option of easily altering the height of the rollers of the door. Another option is doing a wholesome replacement of the rollers.
Any standard sliding glass door is heavy. This means that it is ideally almost impossible to remove it all alone. You should seek assistance. When you are through with removing the door, ensure that you lay it down on a clear space.
Steps To Level A Sliding Glass Door
Step 1
The first step is to identify the side of the door that is not leveled. You can only note this with the aid of a leveling gadget. Use this to check on both the top and the bottom edges of the door. At the end of this exercise, you will be able to determine the side that has to be raised to achieve parity.
Step 2
On the side that should be raised, proceed to raise the roller. Through the holes on the frame of your glass door, you will be able to spot the holes through which you can access the screws. On either side of the door, there is a hole. To raise the roller, use a screwdriver to turn the screw clockwise. This will help you in leveling the door. If you try out adjusting the screws in vain, then that is an indication that the rollers are worn out and due for replacement.
Step 3
You can now move to un-mount the door from the frame. This might not be easy if you are alone. Seek assistance from a friend or a family member since the door is heavy. Hold the frame by both sides and lift it halfway from the door. You can then lift the door up. When doing this, ensure that the bottom of the track is tilted when lifting the door. If you notice that the door is has failed to get off the track, force the wheels open using a screwdriver. Sliding door wheels repair is very important for your sliding door.
Step 4
At this point, the old rollers can be easily extracted from the bottom of the door. You will achieve this by unscrewing old rollers.
Step 5
When this is done, you can now screw in the new rollers. Ensure that you adhere to the directive given by the manufacturer of the package. Some of these packages propose lubrication for the replaced roller. Ensure that you don’t overdo it.
Step 6
You can now proceed to insert the screws on all the end holes. Screw them clockwise for the rollers to be effectively adjusted.
Step 7
In this final step, you can mount your door back. Ensure that you have set the sliding door rollers in the right position and let the door rest on them appropriately. You should be assisted in this step.
When you observe these steps, you will have conducted your patio door repair effectively.